hbjhb

if having tried to fix Nokia X6 Earpiece Speaker Problem that No Audio sound output can be heard and you already check  speaker is okay and also already  tried replacing the Flex cable wire but he problem unsolved. This solution might possibly help to solved the problem. Nokia X6 Earpiece Speaker problem solution If the earpiece speaker and flex cable wire is working okay, those particular components highlighted on the solution might causes the problem if the device is severely damaged by any means of liquid or water damaged. Start to check on the flex pin connector and way down toall corresponding components composed of filter coil and bypass ESD resistor, replace at once if found open or shorted. If the filter coils were okay you may need to rework the power and audio IC (AVILMAS) trace the line paths first while the IC is being removed, then reball the IC, clean the solder balls surface and inplaced it back again.

Here's the solution that might possibly help solve Nokia X6 mouthpiece microphone failure, a problem that no audio sounds can be heard from the other receiving device during a call is created. Nokia X6 Microphone sound failure solution The red lines indicated in the solution above is the microphone's supply voltage if this voltage is cut or not present the mic will not tend to work. There are also resistors that where the digital audio signal is flow across to this components that has a resistance value of 100ohms each, check and replace it first  before attempting to replace the Digital Microphone Module.

This solution covers and may possibly help solved Nokia X6 Ringer and and Hands free loud speaker No sounds can be heard. You may need to ensure that the loud speakers is working well before applying this solution. Nokia X6 Ringer and Hands Free Speaker No sounds problem solution In Nokia X6 the handsfree speaker came with two channel the left and the right channel or so called stereo type. The audio signal is feeds from the power and audio chip (AVILMAS) and feeds to a audio amplifier IC to boost and amplify the sounds intensity. You may need to check, trace, replace and rework those corresponding components indicated on the solution picture above.

Here's a solution that shows the location of BTEMP resistor that caused Charger Not supported on Nokia X6 if damaged. This components needs to replace if cahrger not supported shows on the LCD screen display when the battery charger is being plug-in. X6 Charger Not Supported btemp resistor location This Btemp resistor rated value is 47K. You may easily find it on other non working Nokia PCB board.

If having problem connecting from USB to PC on Nokia X6 , this solution may help if the device is not detected after ensuring that the USB cable wire is okay. The device driver is properly installed but the problem still exists. This solution shows the particular components might caused faulty or damaged and result to a problem connecting to the PC through USB port. Nokia X6 USB Not detected Solution Repair hints: Check the microUSB connector if damaged, oxidated or corroded, clean or replace it.  Check the filter coil and ESD protection chip, replace if found damaged. If the problem still persists check the power supply of the USB transceiver IC, it is conneted to the battery positive line voltage,  if the voltage is okay, rework or reball the USB transceiver IC.

This solution may help fix if the Nokia C5 shows "charger not supported error when the battery charger is plug-in. If the error message shows, this probably cause by a faulty hardware components on Nokia C5 PCB board. Just refer to the solution below and locate the highlighted components for it is part of  the charging indication components. Nokia C5 Charger Not supported problem solution Hints for repair a Nokia C5 charger not supported problem: 1. Try to use another phone's battery and charger. 2. Check/clean the battery terminals and connector 3. Check/ replace the 47K resistor as shown on the solution above

Here's a solution that may help fix and repair hardware related damaged on Nokia C5 No Earpiece Speaker Audio Sound   output . If the earpiece speaker already been check and seems to be working fine but still no audio sounds can be heard. you may need to check those certain components indicated on the solution. Repair hints: 1. Check/replace the ear speaker 2. Clean the speaker terminal pads 3. Check/replace the filter coil 4. Check/ replace the ESD filter or remove it,